Factory Supply N06625 Chemical Injection Line Tube - Chemical Injection Line Tubing – MEILONG

Short Description:

Product Detail

Product Tags

Feedback (2)

We normally think and practice corresponding towards the change of circumstance, and grow up. We aim at the achievement of a richer mind and body plus the living for S32750 Capillary Tubing Control Line, Alloy 825 Chemical Injection Line, Hydraulic Control Line Flatpack Encapsulation, We are anticipating to cooperate with you around the basis of mutual added benefits and common development. We are going to never disappoint you.

Factory Supply N06625 Chemical Injection Line Tube - Chemical Injection Line Tubing – MEILONG Detail:

Product introduction

A general term for injection processes that use special chemical solutions to improve oil recovery, remove formation damage, clean blocked perforations or formation layers, reduce or inhibit corrosion, upgrade crude oil, or address crude oil flow-assurance issues. Injection can be administered continuously, in batches, in injection wells, or at times in production wells.

A small-diameter conduit that is run alongside production tubulars to enable injection of inhibitors or similar treatments during production. Conditions such as high hydrogen sulfide [H2S] concentrations or severe scale deposition can be counteracted by injection of treatment chemicals and inhibitors during production.

Our tubing is characterized with integrity and quality to be specially used in subsea conditions in the industries of oil and gas extraction.

Product Display

Chemical Injection Line Tubing (2)

Alloy Features

Caustic Environments
Austenitic steels are susceptible to stress corrosion cracking. This may occur at temperatures above about 60°C (140°F) if the steel is subjected to tensile stresses and at the same time comes into contact with certain solutions, particularly those containing chlorides. Such service conditions should therefore be avoided. Conditions when plants are shut down must also be considered, as the condensates which are then formed can develop conditions that lead to both stress corrosion cracking and pitting.
SS316L has a low carbon content and therefore better resistance to intergranular corrosion than steels of type SS316.

Application
TP316L is used for a wide range of industrial applications where steels of type TP304 and TP304L have insufficient corrosion resistance. Typical examples are: heat exchangers, condensers, pipelines, cooling and heating coils in the chemical, petrochemical, pulp and paper and food industries.

Dimensional Tolerance

ASTM A269 / ASME SA269, 316L, UNS S31603
Size OD	Tolerance OD	Tolerance WT
≤1/2’’ (≤12.7 mm)	±0.005’’ (±0.13 mm)	±15%
1/2’’<OD≤1’’ (12.7<OD≤25.4 mm)	±0.005’’ (±0.13 mm)	±10%

Meilong Standard
Size OD	Tolerance OD	Tolerance WT
≤1/2’’ (≤12.7 mm)	±0.004’’ (±0.10 mm)	±10%
1/2’’<OD≤1’’ (12.7<OD≤25.4 mm)	±0.004’’ (±0.10 mm)	±8%

Product detail pictures:

Related Product Guide:

We've been commitment to offer the competitive rate ,outstanding merchandise good quality, too as fast delivery for Factory Supply N06625 Chemical Injection Line Tube - Chemical Injection Line Tubing – MEILONG , The product will supply to all over the world, such as: Kuala Lumpur, Croatia, Somalia, There are advanced producing & processing equipment and skilled workers to ensure the products with high quality. We have found an excellent before-sale, sale, after-sale service to ensure the customers that could rest assured to make orders. Until now our products are now moving on fast and very popular in South America, East Asia, the Middle east, Africa, etc.

316L Chemical Injection Line Tube